inmap grid

inmap grid

Create a variable resolution grid

Synopsis

grid creates and saves a variable resolution grid as specified by the information in the configuration file. The saved data can then be loaded for future InMAP simulations.

inmap grid [flags]

Options

      --InMAPData string                      InMAPData is the path to location of baseline meteorology and pollutant data. The path can include environment variables.
                                               (default "${INMAP_ROOT_DIR}/cmd/inmap/testdata/testInMAPInputData.ncf")
      --LogFile string                        LogFile is the path to the desired logfile location. It can include environment variables. If LogFile is left blank, the logfile will be saved in the same location as the OutputFile.
                                              
      --VarGrid.CensusFile string             VarGrid.CensusFile is the path to the shapefile or COARDs-compliant NetCDF file holding population information.
                                               (default "${INMAP_ROOT_DIR}/cmd/inmap/testdata/testPopulation.shp")
      --VarGrid.CensusPopColumns strings      VarGrid.CensusPopColumns is a list of the data fields in CensusFile that should be included as population estimates in the model. They can be population of different demographics or for different population scenarios.
                                               (default [TotalPop,WhiteNoLat,Black,Native,Asian,Latino])
      --VarGrid.GridProj string               GridProj gives projection info for the CTM grid in Proj4 or WKT format. (default "+proj=lcc +lat_1=33.000000 +lat_2=45.000000 +lat_0=40.000000 +lon_0=-97.000000 +x_0=0 +y_0=0 +a=6370997.000000 +b=6370997.000000 +to_meter=1")
      --VarGrid.HiResLayers int               HiResLayers is the number of layers, starting at ground level, to do nesting in. Layers above this will have all grid cells in the lowest spatial resolution. This option is only used with static grids.
                                               (default 1)
      --VarGrid.MortalityRateColumns string   VarGrid.MortalityRateColumns gives names of fields in MortalityRateFile that contain baseline mortality rates (as keys) in units of deaths per year per 100,000 people. The values specify the population group that should be used with each mortality rate for population-weighted averaging.
                                               (default "{\"AllCause\":\"TotalPop\",\"AsianMort\":\"Asian\",\"BlackMort\":\"Black\",\"LatinoMort\":\"Latino\",\"NativeMort\":\"Native\",\"WhNoLMort\":\"WhiteNoLat\"}\n")
      --VarGrid.MortalityRateFile string      VarGrid.MortalityRateFile is the path to the shapefile containing baseline mortality rate data.
                                               (default "${INMAP_ROOT_DIR}/cmd/inmap/testdata/testMortalityRate.shp")
      --VarGrid.PopConcThreshold float        PopConcThreshold is the limit for Σ(|ΔConcentration|)*combinedVolume*|ΔPopulation| / {Σ(|totalMass|)*totalPopulation}. See the documentation for PopConcMutator for more information. This option is only used with dynamic grids.
                                               (default 1e-09)
      --VarGrid.PopDensityThreshold float     PopDensityThreshold is a limit for people per unit area in a grid cell in units of people / m². If the population density in a grid cell is above this level, the cell in question is a candidate for splitting into smaller cells. This option is only used with static grids.
                                               (default 0.0055)
      --VarGrid.PopGridColumn string          VarGrid.PopGridColumn is the name of the field in CensusFile that contains the data that should be compared to PopThreshold and PopDensityThreshold when determining if a grid cell should be split. It should be one of the fields in CensusPopColumns.
                                               (default "TotalPop")
      --VarGrid.PopThreshold float            PopThreshold is a limit for the total number of people in a grid cell. If the total population in a grid cell is above this level, the cell in question is a candidate for splitting into smaller cells. This option is only used with static grids.
                                               (default 40000)
      --VarGrid.VariableGridDx float          VarGrid.VariableGridDx specifies the X edge lengths of grid cells in the outermost nest, in the units of the grid model spatial projection--typically meters or degrees latitude and longitude.
                                               (default 4000)
      --VarGrid.VariableGridDy float          VarGrid.VariableGridDy specifies the Y edge lengths of grid cells in the outermost nest, in the units of the grid model spatial projection--typically meters or degrees latitude and longitude.
                                               (default 4000)
      --VarGrid.VariableGridXo float          VarGrid.VariableGridXo specifies the X coordinate of the lower-left corner of the InMAP grid.
                                               (default -4000)
      --VarGrid.VariableGridYo float          VarGrid.VariableGridYo specifies the Y coordinate of the lower-left corner of the InMAP grid. (default -4000)
      --VarGrid.Xnests ints                   Xnests specifies nesting multiples in the X direction. (default [2,2,2])
      --VarGrid.Ynests ints                   Ynests specifies nesting multiples in the Y direction. (default [2,2,2])
      --VariableGridData string               VariableGridData is the path to the location of the variable-resolution gridded InMAP data, or the location where it should be created if it doesn't already exist. The path can include environment variables.
                                               (default "${INMAP_ROOT_DIR}/cmd/inmap/testdata/inmapVarGrid.gob")
  -h, --help                                  help for grid

Options inherited from parent commands

      --config string   config specifies the configuration file location.

SEE ALSO

• inmap - A reduced-form air quality model.